Manual

■ Use good quality hex drivers to avoid stripping screw heads.
■ Open kit bags in order of assembly steps.
■ Use “Step” index for quantity and size of hardware to be used for assembly.
■ Do not over tighten screws.
■ Use thread lock sparingly on metal parts.
Recommendations for building your RC4WD Trail Finder 2 Truck Kit LWB
1. Carefully remove all parts from bags and sort them. Make sure to use threadlock on all
screws in aluminum.
2. Do not over-tighten screws. Stripping screw heads and holes during assembly can
happen if you are using too much force.
Tips for Assembly
Build Front and Rear
AttentionPaint
Build Right and LeftRepeat or Build Multiple
Cut with Scissors
RemoveCA GlueTrim with Hobby Knife
Glue
Apply Grease
Apply Thread Lock
Instruction Manual Symbols Key
RC4WD TF2 Truck Kit "LWB" W/ 1980
Toyota Land Cruiser FJ55 Lexan Body Set
3