Manual

Use good quality hex drivers to avoid stripping screw heads.
Use thread lock when putting metal screws into metal parts.
Note: Steps marked with an asterisk (*) require thread lock.
Use thread lock sparingly.
Do not over tighten screws otherwise you may strip the thread.
Tips for Assembly
Long Nose Pliers
Cross WrenchThread Lock
Thread Lock(blue)
Hex Drivers (1.5mm, 2mm, 2.5mm)
Recommended Tools
RC4WD TF2 Truck Kit "LWB" W/ 1980
Toyota Land Cruiser FJ55 Lexan Body Set
1