Gelande II 2015 Land Rover Defender D90 Manual

25
D90 Land Rover Body II and KIT Trucks
Step 49
Step 50
Place the front wheel half inside the ring.
Ensure that the wheel design is aligned front and rear.
Ensure that the tire bead is evenly captured in the wheel rim.
The tire may need to be pulled out a little to make it sit properly.
Place the wheel hub on the rear of the wheel and insert a long bolt
(M2.5 x 12mm) through the wheel
Install a nut and tighten onto the long bolt. Make sure the
tirebead is evenly captured while tightening the nut