RC4ZRTR0029 Gelande II RTR with Cruiser Body Manual

1
Recommended Tools
Hex Drivers (1.5mm, 2mm, 2.5mm)
Cross Wrench (M2,M3,M4)
Side Cutter
Modeling/Craft Knife
Thread Lock Long Nose Pliers
Tips for Assembly
Use good quality hex drivers to avoid stripping screw heads.
Use thread lock when putting metal screws into metal parts.
Use thread lock sparingly.
Do not over tighten screws otherwise you may strip the thread.
Plastic Cement/Glue
(Non-Whitening CA Glue)