Instructions for Use

22
La température extérieure ne s’afche que si une sonde optionnelle
est connectée.
Valeur actuelle de la tension d’alimentation.
En utilisant le cordon d’équilibrage de l’accu, vous pouvez vérier la
tension individuelle les éléments du pack d’accus. Quand le cordon
d’équilibrage est branché sur le côté droit du chargeur, le chargeur
afche les valeurs de tensions de chaque élément (jusqu’à 6).
Pour utiliser cette fonction, le pack doit avoir un connecteur relié à
chaque élément.
Le chargeur intègre un grand nombre de fonctions pour que le système vérie les processus et l’état de
l’électronique. En cas d’erreur, l’écran afche la cause de celle-ci et le chargeur émet une alarme sonore.
L’accu est branché sur la sortie avec la polarité inversée.
S’afche dans le cas de détection d’une interruption de la
connexion entre les sorties et l’accu ou d’une déconnexion volon-
taire du cordon de charge durant une charge ou une décharge.
Il y a un court-circuit sur la sortie, vériez le cordon de charge.
Tension d’alimentation inférieure à la limite.
Tension du pack d’accu au lithium mal sélectionnée.
Contrôlez la tension du pack avec soin.
-
18
-
The external temperature only will be displayed when
using the thermal probe.
The present voltage of input DC power.
Using the individual connection cable to the battery,
you can check the individual voltage of each cell in the
battery pack. When connect the cable to the port on
the right side of the charger the program shows the
voltage of each cells for maximum 6 cells in sequence.
To utilise this feature, the battery pack must have
output connector that linked to each cells.
13. Warning and error messages
It incorporates a various functions of protective and monitoring the system to
verify functions and the state of its electronics. In any case of occurring error, the
screen displays the cause of error that is self- explanatory with audible sound.
The output is connected to a battery with incorrect
polarity.
This will be displayed in case of detecting an
interruption of the connection between battery and
output or voluntarily disconnecting the charge lead
during the operation of charge or discharge on output.
There was a short-circuit at OUTPUT. Please check
the charging leads.
The voltage of input power drops below the limit.
The voltage of Lithium battery pack was selected
incorrectly. Verify the voltage of battery pack carefully.
-
18
-
The external temperature only will be displayed when
using the thermal probe.
The present voltage of input DC power.
Using the individual connection cable to the battery,
you can check the individual voltage of each cell in the
battery pack. When connect the cable to the port on
the right side of the charger the program shows the
voltage of each cells for maximum 6 cells in sequence.
To utilise this feature, the battery pack must have
output connector that linked to each cells.
13. Warning and error messages
It incorporates a various functions of protective and monitoring the system to
verify functions and the state of its electronics. In any case of occurring error, the
screen displays the cause of error that is self- explanatory with audible sound.
The output is connected to a battery with incorrect
polarity.
This will be displayed in case of detecting an
interruption of the connection between battery and
output or voluntarily disconnecting the charge lead
during the operation of charge or discharge on output.
There was a short-circuit at OUTPUT. Please check
the charging leads.
The voltage of input power drops below the limit.
The voltage of Lithium battery pack was selected
incorrectly. Verify the voltage of battery pack carefully.
MESSAGES D’ALERTES ET D’ERREURS