Operating instructions

17
88003RC (mode 2) rudder
Rudder denotes the rotation of the “RC EYE One” around the rudder axis (vertical axis). This movement
                
change. For the “RC EYE One”, this movement is not controlled by a tail rotor, but through speed variation
of the individual rotors to each other. The two red rotors show “front”.

control lever to the right, the RC EYE One will turn to the right. If the RC EYE One turns slowly to the left in

in the counter-direction). Push the trimming button until the RC EYE One no longer turns away to the left.
Figure 2a