Operating instructions

25
Figure 6b
88006RC (mode 2) elevator
Elevator denotes the movement around the cross axis which can be compared to the nodding of a head.
Through this, the “RC EYE One S” gains ight speed forwards or backwards or decelerates. The two red
propellers show “front”.
If you move the right control lever (gure 7a) to the front, the “RC EYE One S” will oat forwards as a whole.
If you move the control lever to the rear, the “RC EYE One S” will oat backwards. If the “RC EYE One S”
turns slowly to the rear in hover ight (direction of the white arrow), the model must be trimmed with the
black trimming button (also in the counter-direction). Push the trimming button until the “RC EYE One S”
no longer turns away to the rear.