Manualshelf

Instructions

ManualsBrandsRC Logger ManualsCarsRC Logger Digital pitch gauge
12345678910
9
14. The display will show “--05--”, which indicates that the pitch gauge is now in calibration step 5.
15. Place the pitch gauge horizontally on the oor or any horizontal surface, as shown below:
16. The display will show “--06--”, which indicates that the pitch gauge is now in calibration step 6.
17. Place the pitch gauge horizontally on the oor or any horizontal surface, as shown below:
18. The display will show “--07--”, which indicates that the pitch gauge is now in calibration step 7.
19. Place the pitch gauge horizontally on the oor or any horizontal surface, as shown below:
20. The display will show “--08--”, which indicates that the pitch gauge is now in calibration step 8.
21. Place the pitch gauge horizontally on the oor or any horizontal surface, as shown below: