Manualshelf

Instructions

ManualsBrandsRC Logger ManualsCarsRC Logger Digital pitch gauge
12345678910
8
Pay attention to the orientation of the picture while performing the calibration.
8. The display will show “--02--”, which indicates that the pitch gauge is now in calibration step 2.
9. Place the pitch gauge horizontally on the oor or any horizontal surface, as shown below:
10. The display will show “--03--”, which indicates that the pitch gauge is now in calibration step 3.
11. Place the pitch gauge horizontally on the oor or any horizontal surface, as shown below:
12. The display will show “--04--”, which indicates that the pitch gauge is now in calibration step 4.
13. Place the pitch gauge horizontally on the oor or any horizontal surface, as shown below: