Instructions

10
22. Calibration is nished.
8. BASIC OPERATION
Attach the pitch gauge
There are three ways to attach the pitch gauge onto the RC helicopter.
Adaptors With the two magnets at the back of the pitch gauge, it can be attached to the main
blade adaptor included. Mount the adaptor to the corresponding part of the RC
helicopter.
Magnet The magnet at the top of the pitch gauge can be used to attach it to screws or metal
surfaces on the RC helicopter.
Thread socket The thread socket at the top of the pitch gauge can be used to attach it to a screw on
the RC helicopter.
Read the measurements
The digital pitch gauge 2 can show the inclination angle in two axis, pitch and roll.
Pitch Roll
The inclination angle will show on the display under pitch / roll angle (2).
Protect the pitch gauge
Mount the rubber protector around the pitch gauge to protect it from impact. When the rubber protector is
used, the magnet and thread socket at the top cannot be used.