User manual
RC Logger Datalink
No. 89134RC
INTRODUCTION
The datalink facilitates data transfer between the RC Logger EYEControl app and
RC Logger quadcopters (e.g. NovaX 350) when the mobile device running the app and the
quadcopter are out of range (this range is limited by Bluetooth
®
).
The datalink attaches to the R8 Radio System (89102RC) that sends and receives data
destined for the EYEControl app.
Various live data can be transmitted, including telemetry data and task points. You can,
for instance, determine new task points in the app and commit the new settings to the
quadcopter in ight.
The datalink has a built-in rechargeable battery.
Important note:
The NovaX 350 must run at least NovaX rmware version 2.0 (NovaX 2.0). For other
RC Logger quadcopters, refer to latest information on www.rclogger.com.
Detailed instructions on how you can update your quadcopter to the latest rmware
is available from www.rclogger.com.
INTENDED USE
Please download the latest version of the operating
instructions from our website at www.rclogger.com. Navigate
to the product page and open the ”Downloads” tab. Click on
”Operating instructions” to start the download.
Make this product available to third parties only together
with its
operating
instructions.
The product must not become damp or wet.
For safety and approval purposes (CE), you must not rebuild and/or modify this product.
If you use the product for purposes other than those described above, the product may
be damaged. In addition, improper use can cause hazards such as short circuiting, re,
electric shock etc. Read the instructions carefully and keep them. Make this product
available to third parties only together with its instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
DELIVERY CONTENT
> Datalink
> Operating instructions
SAFETY INSTRUCTIONS
Read the operating instructions carefully and especially
observe the safety information. If you do not follow the
safety instructions and information on proper handling in
these instructions, we assume no liability for any resulting
personal injury or damage to property. Such cases will
invalidate the warranty/guarantee.
General
> The product is not a toy. Keep it out of the reach of children and pets.
> Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
> Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, ammable gases, vapours and solvents.
> Do not use the product in rain.
> Do not place the product under any mechanical stress.
> If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed if the
product:
» is visibly damaged,
» is no longer working properly,
» has been stored for extended periods in poor ambient conditions or
» has been subjected to any serious transport-related stresses.
> Please handle the product carefully. Jolts, impacts or a fall even from a low height can
damage the product.
Signal
> Large objects, walls, pillars, etc. may reduce the signal quality, which may result in
signal loss or transmission failure.
> High voltage power lines or communication broadcasting towers may inuence the
quality of the signal and lead to signal loss. Keep sufcient distance.
Before commissioning
> Before every ight, check the functional reliability of the product. Watch out for any
visible damage such as defective plug connections or product damage.
> Before you y, make sure the battery has sufcient capacity. Recharge if necessary.
> Test the product functionality before take-off.
During operation
Important note:
When you make use of the autonomous ying feature provided by the app, ensure
that you are able to intercept immediately with the transmitter in case of unintended
behaviour.
> Do not take any risks when operating the model. Your own safety and that of your
environment is solely down to you being responsible when dealing with the model.
> Use the product only if your ability to respond is unrestricted. The inuence of tiredness,
alcohol or medication can cause incorrect responses.
> Never remove the product from the transmitter when it is in use.
Batteries
> The battery is built-in. Do not try to remove it.
> Batteries must not be dismantled, short-circuited or thrown into re. There is a risk of
explosion!
> Caution: Risk of explosion if battery is replaced by an incorrect type.
> Dispose of used batteries according to the instructions.
INSTALLATION
1. Turn the transmitter off.
2. Plug the datalink into the trainer port at the back of the transmitter. Make sure it sits
rmly. See above images.
INDICATOR LIGHTS
Status ‘Charge Status’ ‘Low Battery’ ‘Bluetooth’
Turned off Off Off Off
Pairing mode status-dependent Alternate Red / Blue ash
Connected status-dependent status-dependent Blue double ash
Not connected status-dependent status-dependent Blue single ash
Low Battery warning status-dependent Red double ash status-dependent
Charging Red status-dependent status-dependent
Fully Charged Green status-dependent status-dependent
Operating instructions