Instructions
Led – Status/indications | 17
16.2.4 No stunts/tricks at entry level
We strongly advise you to refrain from stunts until you
master the »NovaX 350 in normal flying conditions.
Onceyoumasterthe»NovaX350youmaygraduallyventureintomoreadvancedterrain.
Again,advancedyinghasitsownlearningcurveandcaneasilyleadtoaccidentsand
productdamageifyoulosecontroloverthe»NovaX350.
17. LED – STATUS/INDICATIONS
Refer to ‘37.StatusIndicationTable’onpage46foracompleteoverview.Studythetable
carefullyandconsultitwhenevercolourindicationsareimportant.
18. ELECTRICAL AND ELECTRONIC
CONNECTIONS AND COMPONENTS
18.1 Wire slack
It is important to avoid wire slack. You can eliminate wire slack by twisting the wires.
Note [ Fig. 1 ].
Fig. 1
18.2 Short cicuiting
> The power board (PCB-6)must nevertouchthe carbon bre frame. Touching can
result in an immediate short circuit.
> MakesureyoudonottouchthePCBboardswithanywiresorconnectors.Beespecially
carefulwhentheightbatteryisconnected.
18.3 Electrostatic discharge
Electrostaticdischargecandamageelectroniccomponents.Dischargeyourselfbeforeyou
touch them and do not leave sweat residue.
18.4 Magnetic power
Keep the »NovaX 350 away from magnetic sources.The »NovaX 350 uses magnetic
componentsfornavigationpurposeandtheymaybeimpairedordamagedbyexternal
magnetic forces.