Instructions

Geofence And Distance Fence | 31
21. Geofence and distance fence
■
Study»Fig.14.
■
Yousetupavirtualfence(distanceandmax.altitude)inwhichtheNavigator250ies.
■
GeofenceandDistancefencesettingsareavailableintheEYEControl:Navigatorapp
andmustrstbeenabledintheapp.
■
GeofenceandDistancefenceonlyworkinGPSightmodewith‘Safebank’enabled.
Othermodesandbankingsettingsdeactivatethefunctions.
1. ActivatetheGPSightmodeandsetbankingto‘Safebank’.
2. Setthedistance radiusand themax.altitudeintheEYEControl:Navigatorappand
activate the function.
3. Determineatake-offpoint.
4. WhenyouytheNagivator250,itstayswithinthesetboundaries.
■
SwitchingtoaightmodeotherthanGPSwhileGeofenceisactivatedallowsyouto
leavethesetboundaries.Activate
GPS mode (and ‘Safe bank’) againandybackinto
theGeofencezoneinordertouseGeofenceagain(notethatyouonlycanycloserto
theGeofencezonebutnolongerfurtherawayfromit).
■
Switchingto Basicightmode deactivatesmax.height andallowsyou toyhigher
thanthepre-setmax.altitude.Whenswitchingbackto
GPS mode (and ‘Safe bank’)
the Navigator 250 automatically descends to the set max. altitude and re-activates
max. height.
Max.
Height
Min.
Height
Navigator 250
Radius
Fig. 14
1040 m
1000 m
40 m
0 m
Fig. 15