Instructions

20 | Getting The Navigator 250 Into The Air
14.8 Video TX
■
RealtimevideotransmissionispossibleviacompatibleFPVgoggles.
■
Compatiblebrands:RCLogger(89141RC),FatShark
■
Readtheinstructionssuppliedwiththegogglesbeforeyouusethem.
14.8.1 Default channel
DefaultchannelontheNavigator250:
5820 MHz
14.8.2 Switch channel
1. Turn the Navigator 250 upside down in order to have access to the video board
channelswitches.
2. Studythefollowingsections‘Channelswitch’and‘Availablechannels’andadjustthe
channeltomatchyourFPVgoggles.
Channel switch:
Videoboardwithchannelswitches Howtoswitchchannels
S5
S4
S2
ON
S3
S1
Available channels:
Band Channel Frequency S1 S2 S3 S4 S5
A CH1 5865MHz 0 0 0 0 0
CH2 5845MHz 0 0
1 0 0
CH3 5825MHz 0
1 0 0 0
CH4 5805MHz 0
1 1 0 0
CH5 5785MHz
1 0 0 0 0
CH6 5765MHz
1 0 1 0 0
CH7 5745MHz
1 1 0 0 0
Band Channel Frequency S1 S2 S3 S4 S5
B CH2 5752MHz 0 0 1 1 0
CH3 5771MHz 0
1 0 1 0
CH4 5790MHz 0
1 1 1 0
CH5 5809MHz
1 0 0 1 0
CH6 5828MHz
1 0 1 1 0
CH7 5847MHz
1 1 0 1 0
CH8 5866MHz
1 1 1 1 0
F CH1 5740MHz 0 0 0 x
1
CH2 5760MHz 0 0 1 x 1
CH3 5780MHz 0 1 0 x 1
CH4 5800MHz 0 1 1 x 1
CH5 5820MHz 1 0 0 x 1
CH6 5840MHz 1 0 1 x 1
CH7 5860MHz 1 1 0 x 1
‘x’standsforeither1or0,eitherpositionisokay
14.8.3 Connecting FPV goggles
1. Installtheightbattery.
2. TurnthegogglesonandadjustthechannelonyourFPVgogglestomatchtheset
channel.
3. Checkvideotransmission.