Instructions

Protect Your Model | 15
13.4 Lost locator
The Navigator 250 is equipped with a lost locator function. When triggered the
Navigator250emitsbeepsintheS.O.S.pattern.Thefunctionistriggeredbyacrashor
hardlanding,butcanalsomanuallybetriggeredviatheSWA(Channel7)switchonthe
transmitter.Fliptheswitchdowntotriggerthefunction.
Thebeepingcannotbestoppedbyippingtheswitchbacktoitsdefaultposition.Proceed
asfollowstostopthebeeps:
1. Ifyoutriggereditviatransmitter,iptheSWAswitchbacktoitsdefaultposition.
2. Movethrottlesticktotopandruddersticktorighttostopbeeps.
Note: The beeping is also stopped as soon as the motors
are started again.
13.5 LED – Status/Indications
Refer to ‘28.Statusindicationtable’onpage36foracompleteoverview.Studythetable
carefullyandconsultitwhenevercolourindicationsareimportant.
13.6 Electrical/electronic components
■
MakesureyoudonottouchthePCBboardswithanywiresorconnectors.Beespecially
carefulwhentheightbatteryisconnected.
■
Electrostaticdischargecandamageelectroniccomponents.Dischargeyourselfbefore
youtouchthemanddonotleavesweatresidue.
■
Keep the Navigator 250 away from magnetic sources. The Navigator 250 uses
magneticcomponentsfornavigationpurposeandtheymaybeimpairedordamaged
byexternalmagneticforces.