Safety data sheet

Distributed by
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Item no.: 1301302
Material Safety Data Sheet
3. Composition, Information on Ingredients
Composition
CAS NO
EC#
Weight (%)
Lithium Cobalt Oxide
12190-79-3
235-362-0
30 - 45
PVDF
24937-79-9
200-867-7
0.8 - 1.2
Graphite
7782-42-5
231-955-3
16 - 22
Electrolyte
-
-
13 - 16
CMC
9004-32-4
900-432-4
PP+PE
9003-07-0
-
1.5 - 2.7
Copper Foil 7440-50-8 231-159-6 10 - 12
Aluminum Foil 7429-90-5 231-072-3
Aluminum 7429-90-5 231-072-3 5 - 7
Nickel 7440-02-0 231-853-9 0.1
SBR 9003-55-8 - 0.4 - 0.8
Carbon 1333-86-4 231-153-3 0.5 - 0.8
Weight of metallic lithium per cell: 24.5 +/-1.5 g. There is no metallic lithium in the lithium polymer battery. The lithium polymer
battery is with a watt-hour rating: <=20 Wh/cell, <=100 Wh (battery pack).
4. First Aid Measures
Description of first aid measures
General information:
No special measures required.
After eye contact:
Flush eyes with plenty of water for several minutes while holding eyelids open. Get medical attention if irritation persists.
After skin contact:
Remove contaminated clothing and shoes. Immediately wash with water and soap and rinse thoroughly. Wash clothing and
shoes before reuse. If irritation occurs, get medical attention.
After inhalation:
Remove victim to fresh area. Administer artificial respiration if breathing is difficult. Seek medical attention.
After swallowing:
Do not induce vomiting. Get medical attention.
Information for doctor:
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
Page 2 of 8