Installation Manual

RBP-1215B-RX3/RBP-1215SS/RX3 INSTALLATION INSTRUCTIONS
Page 4 of 6 12/2/14
RBP 13000 TEMPLE AVE. CITY OF INDUSTRY, CA 91746 800-237-7560
Fig 5
Line up oval hole in body panel
with oval hole in template.
Mark both outer hole locations
onto body panel
(Fig 7) Use 7/16” drill bit to drill holes
Slide the U-Nut into the oval
hole. Line up nut with drilled hole
(2) 10mm U-Nuts
Front
Front
Fig 6
Front
Fig 8
(Fig 9) 09-14 driver side mounting locations illustrated
Steel drill template