Specifications

Signature SX Series 2 Owner’s Manual
Attaching Speaker Wires
If using a banana jack, attach the matching positive or negative wire and push directly
into binding post top hole.
If not using a banana jack, simply loosen the binding nut to allow the hole in the side
of the terminal to become exposed. Strip ¼-inch of the insulation from the end of the
speaker wire and insert the exposed wire end into the now exposed hole in the side of
the terminal. Tighten the binding nut by turning the nut clockwise until the speaker
wire is secured. Repeat for the other speaker wire(s) as necessary.
Features (continued)
performance of reference-grade components. The tweeter has a larger motor structure,
increased power handling and improved resolution. The aluminum cone woofers that give
the Signature SX Series its great bass to upper-midrange performance are replaced with
an even more advanced aluminum cone woofer featuring a fixed-position phase plug. The
addition of this phase plug extends frequency response and increases power handling,
resulting in increased sonic clarity. The crossover network components have been en-
hanced to manage the higher quality driver components while providing increased audio
quality and power handling.