Specifications

Tower Speaker Outrigger Installation
These attractive tower speaker outriggers produce a wider support base for the Signature
SX Series tower speakers creating stability and are ideal when placing speakers on a thickly
carpeted floor.
Package contents include:
4 each outrigger plates
4 metal spike feet
4 each top cap nuts
4 each threaded adjustment washers
12 each MDF wood screws
4 each floor discs
Installing the tower outrigger feet:
1. Attach the tower speaker outrigger plates
to the bottom of the speaker with the
screws provided, as shown in figure 2
below. Rotate the outrigger plates so they
are angled properly (as shown in figure 2
below) before attaching the spike feet,
adjustable washer and top cap nut.
NOTE: To prevent scratching or damaging
of the cabinet, turn the tower upside down
on a soft surface when attaching the tower outrigger feet.
2. Attach the metal spike feet using the top cap nuts and adjustable washer as shown in
figure 1.
3. Adjust the level/height using the adjustment washer.
NOTE: The metal spike feet work best on carpeted
surfaces. Optional floor discs have been provided
for use on wood or tiled floors.
FIGURE 1
Top Cap Nut
Outrigger Plate
Adjustment
Washer
MDF Wood Screws
Spike Feet
Floor Discs
FIGURE 2
Attach each outrigger plate
with the MDF wood screws
Bottom of
tower speaker
Front of tower speaker
Signature SX Series 8 Owner’s Manual
Top View
Orientation of the outrigger plates
on the bottom of the speaker