SIGNATURE SX SERIES SPEAKERS AND SUBWOOFERS Owner ’s Manual
Introduction Congratulations on your purchase of Signature SX Series freestanding speakers and/or subwoofer! Your speakers are the result of many years of research and development dedicated to producing high quality products for home audio and audio/video systems. This manual contains features, setup recommendations and specifications for the Signature SX Series freestanding speakers. It is recommended you thoroughly read through the material contained in this manual before connecting your speakers.
Features (continued) performance of reference-grade components. The tweeter has a larger motor structure, increased power handling and improved resolution. The aluminum cone woofers that give the Signature SX Series its great bass to upper-midrange performance are replaced with an even more advanced aluminum cone woofer featuring a fixed-position phase plug. The addition of this phase plug extends frequency response and increases power handling, resulting in increased sonic clarity.
Room Setup Suggestions In order to obtain the best possible sound from your speaker system, it is important to determine where the speakers will sound best in your listening room. Room reflections from the floor, ceiling and side walls influence the balance, imaging and overall sonic quality at the listening position. Experiment with speaker placement to determine which location offers the best overall sound.
Room Setup Suggestions (continued) IMPORTANT NOTICE REGARDING BASS MANAGEMENT: It is important the signal being sent to the subwoofer be a non-boosted or “flat” signal. To be sure of this, check the settings on your receiver or processor to make sure any “bass boost”, “super bass” or “loudness” is set to Off. In most cases a home theater receiver or processor will determine the crossover frequency through bass management settings.
Subwoofer Safety Instructions The lightning flash with the arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product enclosure that may be of sufficient magnitude to constitute a risk of shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
Subwoofer Amplifier Controls and Setup (continued) 2. Volume/Gain Control: The volume/level control should be at the minimum setting (all the way counter-clockwise) before plugging the subwoofer into an AC wall socket. Once plugged in, turn the level control up one quarter of a turn (9 o’clock position) for an initial setting. The level control may be adjusted while playing to match the subwoofer level with the rest of the system.
Subwoofer Amplifier Controls and Setup (continued) 11. Fuse Access: This is the power fuse access. WARNING! In the event the fuse must be replaced, the replacement fuse must match exactly the original fuse value. If the replacement fuse is not of the same value, damage to the Subwoofer Amplifier may result. CAUTION! Before replacing the fuse, disconnect the power cord from the power receptacle. 12. Power: Power on and off switch.
Tower Speaker Outrigger Installation These attractive tower speaker outriggers produce a wider support base for the Signature SX Series tower speakers creating stability and are ideal when placing speakers on a thickly carpeted floor. Package contents include: 4 each outrigger plates 4 metal spike feet 4 each top cap nuts 4 each threaded adjustment washers 12 each MDF wood screws 4 each floor discs Top Cap Nut Outrigger Plate Adjustment Washer Installing the tower outrigger feet: 1.
Specifications Model: SX-10 SX-10/R SX-1010N System Type: Powered Subwoofer Powered Subwoofer Passive Subwoofer Frequency Response: 29Hz-150Hz (±3dB) 26Hz-100Hz (±3dB) 24Hz-180Hz ±3dB Sensitivity: N/A N/A 90dB (2.
Specifications (continued) Model: SX-1010N/R SX-1010P SX-1010P/R System Type: Passive Subwoofer Powered Subwoofer Powered Subwoofer Frequency Response: 22Hz-100Hz ±3dB 22Hz-150Hz ±3dB 20Hz-100Hz ±3dB Sensitivity: 90dB N/A N/A Recommended/ Rated Power: 200-500 Watts 350 Watt Amplifier Included 500 Watt Amplifier Included Woofer(s): (2) 10” (254mm) Reference Aluminum Subwoofers (2) 10” (254mm) Aluminum Subwoofers (2) 10” (254mm) Reference Aluminum Subwoofers Tweeter(s): N/A N/A N/A
Specifications (continued) Model: SX-12 SX-12/R SX-441C System Type: Powered Subwoofer Powered Subwoofer Center Channel Speaker Frequency Response: 27Hz-150Hz ±3dB 24Hz-100Hz ±3dB 60Hz-20kHz ±3dB Sensitivity: N/A N/A 89dB Recommended/ Rated Power: 350 Watt Amplifier Included 400 Watt Amplifier Included 75-150 Watts Woofer(s): (1) 12” (305mm) Aluminum Subwoofer (1) 12” (305mm) Reference Aluminum Subwoofer (2) 4” (102mm) Aluminum Cone Woofers Tweeter(s): N/A N/A (1) 1” (25mm) Silk Do
Specifications (continued) Model: SX-441C/R SX-44 SX-44/R System Type: Center Channel Speaker On-wall Surround Speaker On-wall Surround Speaker Frequency Response: 65Hz-20kHz ±3dB 70Hz-20kHz ±3dB 70Hz-20kHz ±3dB Sensitivity: 89dB 88dB 88dB Recommended/ Rated Power: 75-150 Watts 75-150 Watts 75-150 Watts Woofer(s): (2) 4” (102mm) Reference Aluminum Woofers (2) 4” (102mm) Aluminum Cone Woofers (2) 4” (102mm) Reference Aluminum Woofers Tweeter(s): (1) 1.
Specifications (continued) Model: SX-61 SX-61/R SX-6100C System Type: Bookshelf Speaker Bookshelf Speaker Dedicated Center Channel Speaker Frequency Response: 55Hz-20kHz ±3dB 55Hz-20kHz ±3dB 50Hz-20kHz ±3dB Sensitivity: 87dB 87dB 92dB Recommended/ Rated Power: 75-150 Watts 75-150 Watts 75-450 Watts Woofer(s): (1) 6½” (165mm) (1) 6½” (165mm) Aluminum Cone Woofer Reference Aluminum Cone Woofer (4) 6½” (165mm) Aluminum Cone Woofers Tweeter(s): (1) 1” (25mm) Silk Dome Tweeter (1) 1.
Specifications (continued) Model: SX-6100C/R SX-6300 SX-6300/R System Type: Dedicated Center Channel Speaker Tower Speaker Tower Speaker Frequency Response: 50Hz-20kHz ±3dB 35Hz-20kHz ±3dB 35Hz-20kHz ±3dB Sensitivity: 92dB 88dB 88dB Recommended/ Rated Power: 75-450 Watts 100-300 Watts 100-300 Watts Woofer(s): (4) 6½” (165mm) Reference Aluminum Cone Woofers (3) 6½” (165mm) Aluminum Subwoofers (2) 4” (102mm) Aluminum Cone Woofers (3) 6½” (165mm) Aluminum Subwoofers (2) 4” (102mm) Referen
Specifications (continued) Model: SX-661 SX-661/R SX-661C System Type: L/R Speaker (Left / Right Main Speaker) L/R Speaker (Left / Right Main Speaker) Dedicated Center Channel Speaker Frequency Response: 55Hz-20kHz ±3dB 55Hz-20kHz ±3dB 55Hz-20kHz ±3dB Sensitivity: 90dB 90dB 90dB Recommended/ Rated Power: 75-200 Watts 75-200 Watts 75-200 Watts Woofer(s): (2) 6½” (165mm) Aluminum Cone Woofers (2) 6½” (165mm) Reference Aluminum Cone Woofers (2) 6½” (165mm) Aluminum Cone Woofers Tweeter(s
Specifications (continued) Model: SX-661C/R SX-8300 SX-8300/R System Type: Dedicated Center Channel Speaker 3-way Tower Front Main or Rear Speakers 3-way Tower Front Main or Rear Speakers Frequency Response: 55Hz-20kHz ±3dB 25Hz-20kHz ±3dB 25Hz-20kHz ±3dB Sensitivity: 90dB 91dB 91dB Recommended/ Rated Power: 75-200 Watts 100-500 Watts 100-500 Watts Woofer(s): (2) 6½” (165mm) Reference Aluminum Cone Woofers (3) 8” (203mm) Aluminum Subwoofers (2) 6½” (165mm) Aluminum Cone Woofers (3) 8”
Specifications (continued) Model: SX-88 SX-T1 SX-T1/R System Type: Powered Subwoofer L/R Front Main Speaker L/R Front Main Speaker Frequency Response: 35Hz-180Hz ±3dB 50Hz-20kHz ±3dB 50Hz-20kHz ±3dB Sensitivity: N/A 92dB 92dB Recommended/ Rated Power: 300 Watt Amplifier Included 100-500 Watts 100-500 Watts Woofer(s): (2) 8” (203mm) Aluminum Woofers (4) 6½” (165mm) (4) 6½” (165mm) Aluminum Cone Woofers Reference Aluminum Cone Woofers Tweeter(s): N/A (3) 1” (25mm) Silk Dome Tweeters (
Specifications (continued) Model: SX-T2 SX-T2/R SX-T3 System Type: L/R Front Main Speaker L/R Front Main Speaker L/R Front Main Speaker Frequency Response: 22Hz-20kHz ±3dB 20Hz-20kHz ±3dB 22Hz-20kHz ±3dB Sensitivity: 92dB 92dB 92dB Recommended/ Rated Power: 100-500 Watts 100-500 Watts 100-500 Watts Woofer(s): (2) 10” (254mm) Aluminum Subwoofers (4) 6½” (165mm) Aluminum Cone Woofers (2) 10” (254mm) Aluminum Subwoofers (4) 6½” (165mm) Reference Aluminum Cone Woofers (4) 10” (254mm) Aluminu
Specifications (continued) Model: SX-T3/R System Type: L/R Front Main Speaker Frequency Response: 20Hz-20kHz ±3dB Sensitivity: 92dB Recommended/ Rated Power: 100-500 Watts Woofer(s): (4) 10” (254mm) Aluminum Subwoofers (4) 6½” (165mm) Reference Aluminum Cone Woofers Tweeter(s): (3) 1.
Troubleshooting—Speakers Situation: Probable Cause: No sound from speakers. Speaker wire not connected. Make sure wire is connected at both the speaker and the amplifier observing proper polarity. No sound from one speaker. Speaker selector on amplifier is not on. Activate proper selector on amplifier. Balance control on receiver or pre-amp is not centered. Place balance control in the center. Speaker wire not securely connected. Check all connections at amplifier and speakers.
Warranty Your RBH Sound Signature SX Series speakers are covered by a limited warranty against defects in materials and workmanship for a period of 5 years, and subwoofer amplifiers 1 year from the original date of purchase. This warranty is provided by the authorized RBH Sound dealer where the speaker was purchased. Warranty repair will be performed only when your purchase receipt is presented as proof of ownership and date of purchase.
