Instruction Manual

Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
2
Step 3
Step 4
Step 5 Step 6
Using long nose needle pliers, disconnect the black and
red wires that connect to the reset button.
Locate and disconnect the battery from the controller
before trying to disconnect the reset button.
Using a Phillips screwdriver, remove the four (4) screws
on the battery holder. Locations of the screws are circled
in the image below. Remove battery holder and set aside.
Using a 4 mm Allen wrench, remove the two (2) hexagonal
screws on the deck cover. The locations of the screws are
circled in the image below. Remove the deck cover and
set aside.