Instructions

2
Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM PST.
POWER CORE 90 CONTROLLER
REPLACEMENT INSTRUCTIONS
PA R T # W131114 0 2 015
When reconnecting the new controller, make sure
to connect the wires from the controller on the silver
colored prongs from the power switch, the brown
wire connects to the middle prong and the yellow
wire connects to the other silver prong.
Using a Phillips screwdriver, remove the two (2)
screws that attach the controller to the tray (circled in
the image below). Remove old/damaged controller.
Step 6
Step 5
Reverse the procedures
• Place the controller back on the tray.
• Re-connect the battery and the Control Module.
• Place battery back inside the tray.
• Replace the battery holder
• Re-attach deck cover with four (4) screws.
Attention: Charge battery 12 hours before using.
Step 7