Operator`s manual

To set your engine's lights to indicate that it is pulling a string of cars behind it, press

the LMK softkey so the DCS Remote displays “Marker Light OFF”. Your engine's

lights will now look like this (For Swiss Operation):

The second lighting feature of your Traxx Electric Engine allows you to display either

Swiss or German operation. To change between German or Swiss Operation, you want

to press the LBE softkey (the Default is Swiss). Below are illustrations showing the

lighting for German or Swiss Operation.

Swiss Operation is the default and will be based upon how you have the Train/No-

Train indicator set. To ensure Swiss Operation lighting is being used press the LBE

softkey on your DCS Remote so it displays “Beacon Light ON”. To switch to German

Operation, press the LBE softkey so that the DCS Remote displays “Beacon Light OFF”.

Your new Traxx Electric Engine has two new lighting features not found on any other

models. You are now able to, by selecting two different softkeys on the DCS Remote,

change how the engine's lights respond. Please refer to your DCS Manual for

definitions and further explanation on how softkeys are utilized in your PS3.0-equipped

engine. Below is a lighting diagram.

For Train/No-Train Indicators:

To set the Train/No-Train indicator Lights you want to press the LMK softkey so the

DCS Remote displays “Marker Light ON”. By default your engine will be set to a No-

Train indication. That means your engine has no string of cars being pulled. Your

engine lighting will look like this:

Front

Rear

red

Forward (Front) Forward (Rear) Reverse (Front) Reverse (Rear)

Premier TRAXX Electric Engine