Instructions / Assembly

3 Burner Griddle and Outdoor Kitchen
Model No. GGC2227M
12
Operating Instructions
Checking for Leaks
Burner Connections
1. Make sure the regulator hose and valve
connections are securely fastened to the burner
and the tank.
2. Visually check the connection between the
burner/venturi tube and orifice.
3. Make sure the burner/venturi tube fits over the
orifice.
W WARNING: Failure to inspect this
connection or follow these instructions
could cause a fire or an explosion which
can cause death, serious bodily injury or
damage to property.
4. Please refer to diagram for proper installation
(Figure 1).
5. If the burner/venturi tube does not rest flush
to the orifice, as shown, please contact
1.800.694.0013 for assistance.
Tank/Gas Line Connection
1. Make 2-3 oz. of leak detection solution by mixing
one part liquid dish washing soap with three parts
water.
2. Make sure control knobs are in the “
OFF”
position (Figure 2).
3. Connect LP gas tank per “Installing LP Gas Tank”
section.
4. Turn LP gas tank valve to “OPEN.”
5. Spoon several drops of solution, or use a squirt
bottle, at all “X” locations (Figures 1 and 3).
a. If any bubbles appear, turn LP gas tank valve to
“CLOSED,” reconnect and re-test.
b. If you continue to see bubbles after several
attempts, turn LP gas tank valve to “CLOSED”
and disconnect LP gas tank, per “Disconnecting
LP Gas Tank” section. Contact 1.800.694.0013
for assistance.
c. If no bubbles appear after one minute, turn
LP gas tank valve to “CLOSED,” wipe away
solution and proceed.
Operating the LP Gas Griddle
First Use
1. Make sure all labels, packaging and protective
films have been removed from the griddle.
2. Light griddle per “Lighting” section.
3. Remove manufacturing oils before cooking on this
griddle for the first time.
4. Season your griddle per “Seasoning Griddle”
section.
Lighting
W CAUTION: Keep outdoor gas cooking
appliance area clear and free from
combustible materials, gasoline and other
flammable vapors and liquids.
W CAUTION: Do NOT obstruct the flow of
combustion and ventilation air.
W CAUTION: Check and clean burner/venturi tubes for insects and insect
nests. A clogged tube can lead to a fire.
W CAUTION: Do NOT use non-stick cooking sprays because they contain a lot
of water and can burn onto the griddle, damaging the surface.
W CAUTION: Do NOT use corn oil as it contains a high level of sugar, which
can carmelize and burn onto the surface.
1. Open lid.
2. Check for obstructions of airflow to the burners. Spiders, insects and webs can clog the
burner/venturi tube. A clogged burner tube can lead to a fire.
3. All control knobs must be in the “
OFF” position (Figure 2).
4. Connect LP gas tank per “Installing LP Gas Tank” section.
5. Turn LP gas tank valve to “OPEN.”
6. Push and turn any control knob to
(HIGH). The burner should light. If it does not, repeat
up to three times.
Installing LP Gas Tank
To operate, you will need one precision-filled standard barbecue
grill LP gas tank with external valve threads.
W CAUTION: LP gas tank must be properly
disconnected and removed prior to moving this
griddle.
Inserting LP Gas Tank
Place precision-filled LP gas tank upright into the notches in the right cart frame so the tank
valve is facing the gas line connection.
Connecting LP Gas Tank
1. Make sure control knobs are in the “ OFF” position (Figure 2).
2. Before connecting, be sure there is no debris caught in the head of the LP gas tank, head
of the regulator valve or in the head of the burner or
burner ports.
3. Connect regulator/hose assembly to tank by turning
knob clockwise until it stops.
4. Perform leak test per “Checking for Leaks” section.
Disconnecting LP Gas Tank
1. Make sure control knobs are in the “ OFF” position
(Figure 2).
2. Before disconnecting, make sure the LP gas tank valve is “CLOSED.”
3. Disconnect regulator/hose assembly from LP gas tank
by turning knob counterclockwise until it is loose.
W CAUTION: LP gas tank must be properly
disconnected and removed prior to moving
this griddle.
4. Place the protective cap cover on the LP tank and
store the tank outdoors in a well ventilated area out of
direct sunlight.
20 lb
9 Kg
17.9 in. / 45.5 cm
12.2 in. / 31 cm
Figure 1
Burner/
Venturi Pipe
LP Gas
Valve with
Orifice
LP Gas
Connection
Figure 2
Figure 3
X
X
X
X
X
Figure 4
Lighting
Hook
Match
Figure 5
Burner
Flame
Slight
Yellow
Slight
Blue
Dark
Blue
X
IMPORTANT
Before first use and after each use, always
season your griddle per “Seasoning Griddle”
section.
OFF
HIGH
LOW