User Manual

6
REPAIR AND MAINTENANCE
q Replacing the Fuse
WARNING:
To prevent shock, please follow the
instructions accordingly and do not
skip or combine any steps.
2 Under the front fender and
through the frame, locate the fuse
box attached to the top of the
battery.
3 Open the fuse cover to expose
the fuse.
4 Remove the fuse and replace
with a new one of equal
amperage.
Note: Amperage rating is
located on top of fuse.
5 Close the fuse cover.
Amperage
number
q Replacing the Chain
Tools required: 6mm Allen wrench, 10mm open wrench and Phillips screwdriver.
1 Make sure the power switch is
turned OFF.
2 Remove the bolt on the
inside of the rear wheel. Remove
nut and pull bolt out of axle.
3 Remove the 3 screws from the
top half of the chain guard and
remove.
1 Remove the bolt and washers
on the outside of the rear wheel.
5 Spread the chain tensioner
apart to loosen chain.
6 Remove chain from both sprockets
and replace with new chain.
4 Remove the two (2) screws
from the bottom half of the chain
guard and remove.
WARNING:
Do not touch motor after use. Motor
is (or can be) very hot.