User Manual

8
REPAIR AND MAINTENANCE
Before beginning repair or maintenance:
• Read the instructions
• Disconnect charger
• Turn the power button OFF
• Exercise caution around
exposed parts
• Contact Razor Customer Service
if unsure about any repair or
maintenance
1 Using the 13 mm socket loosen
the locknut.
1 Using the 13 mm socket, loosen
the locknut.
2 Remove the locknut, washer and
wheel.
2 Remove the locknut, washer and
wheel.
Note: Make sure to align the holes
on the replacement wheel with the
splines on the motor gear.
3 Insert replacement wheel,
washer and locknut.
4 Tighten the locknut.
Front Wheel Replacement
Tool Required: 13 mm Socket Wrench
Rear Wheel Replacement
Tool Required: 13 mm Socket Wrench
5-1
5-2
5-3
5-4
5-2
5-3
Wheel
5-1 Lock Nut
5-2 Washer (x2)
5-3 Bearing (x2)
5-4 Spacer