User Manual

Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
4 Assemble the motor and tighten the screws.
5 Reconnect the motor connecting line and all
the wires. Tighten the screws.
3 Using a 5 mm Allen wrench remove
the four (4) hex screws and take out the motor.
6 Tighten the screws on top of the board and
secure the locknuts under the board.
REPAIR AND MAINTENANCE
Hub Motor Replacement – Cont’d
5 mm Allen Wrench
9