User Manual

REPAIR AND MAINTENANCE

Before beginning repair or maintenance:

• Read the instructions

• Disconnect charger

• Turn the power button OFF

• Exercise caution around

exposed parts

• Contact Razor Customer Service

if unsure about any repair or

maintenance

1 Using the 13 mm socket wrench loosen the locknut. 2 Remove the locknut, washer and wheel.

3 Insert replacement wheel, washer and locknut. 4 Tighten the locknut.

Wheel Replacement

Tool Required: 13 mm Socket Wrench

Hub Motor Replacement

Tools Required: 3 mm & 5 mm Allen Wrenches, Phillips Screwdriver, and 8 mm Wrench

5-1

5-2

5-3

5-4

5-2

5-3

Wheel

5-1 Lock Nut

5-2 Washer (x2)

5-3 Bearing (x2)

5-4 Spacer

1 Using a 3 mm Allen wrench loosen and

remove ten (10) hex screws (last four (4) hex

screws are held by lock nuts to be removed

with an 8 mm wrench).

2 With the Philips screwdriver, remove the motor

connecting line and disconnect all the wires.

3 mm Allen Wrench

8 mm Wrench