User Manual

6
PRE-RIDE CHECKLIST
Frame and Handlebars
Check for cracks or broken connections. Although broken frames
are rare, it is possible for an aggressive rider to run into a curb
or object and wreck and bend or break. Get in the habit of
inspecting your electric product on a regular basis.
Hardware/Loose Parts
Before every ride, check all parts, such as nuts, bolts, cables,
fasteners, etc., to ensure they are secure and assembled
correctly. There should not be any unusual rattles or sounds
from loose parts or broken components. If the product is
damaged, do not ride. Reference “Safety Warnings” on
pages 1 and 2 of this manual.
Safety Gear
Always wear proper protective gear, such as an approved safety
helmet. Elbow pads and kneepads are recommended. Always wear
closed toe shoes (lace-up with rubber soles) and keep shoelaces
tied and out of the way of the wheels. NEVER RIDE BAREFOOTED
OR IN SANDALS.
Laws and Regulations
Always check and obey any local laws or regulations.
Be Careful!
This product is not for aggressive or trick riding. Avoid steep
inclines and don’t ride too fast — you can lose control and fall.
Skateboard parks are not designed for young riders. Never ride
in traffic or on the street and watch your surroundings for
pedestrians, skaters, skate boards, electric products, bikes,
children or animals who may enter your path and respect
the rights and property of others.
Maintain a hold on the handlebars at all times.
USAGE
WARNING: Supervising
adult should help child to
understand how the “power”
switch and “push button throttle”
are both needed to generate.
Make sure the push button throttle
is NOT depressed when turning the
power switch on.
Once the power switch is in the
ON position, pushing the throttle
button will cause the product to
move.
How to Ride
How to Stop
Release the push button throttle to stop product.
1 Before turning unit on, make sure child has both hands
on the handlebars and both feet on the deck plate.
• Turn power switch ON
Note: Power switch should be turned on by an adult.
2 Press the push button throttle to make product go.