User Manual

3
Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
Adult assembly required. Remove contents from box. Inspect the contents for scratches in the paint and/or dents that
may have occurred during shipping. Because your electric product was partially assembled and packed at the factory,
there should not be any problems, even if the box has a few scars or dents.
MAKE SURE POWER SWITCH IS TURNED “OFF” BEFORE CONDUCTING ANY ASSEMBLY OR
MAINTENANCE PROCEDURES.
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult or someone with experience in bicycle mechanics.
Allow up to 10 minutes for assembly, not including initial charge time.
Allow up to 12 hours for charge (see page 5 for charging information).
WARNING: DO NOT USE
NON-RAZOR PRODUCTS WITH
YOUR RAZOR JR Lil’ E.
Razor Jr products are built to
certain Razor design specifications.
The original equipment supplied
at the time of sale was selected
on the basis of its compatibility
with the frame and all other parts.
Certain aftermarket products may
not be compatible and will void
the warranty.
Product ID Locations:
1. Frame (Next to charger port)
2. Charger
3. Box (not shown)
Charger Port
1
Power Switch
Handlebars/T-bar
Headset Cover
Push Button
Throttle
Front Wheel
Rear Wheels
BEFORE YOU BEGIN
Required Tool
5 mm Allen Wrench
Box Contents:
• Lil’ E
• Tool
• Owner’s Manual
• Charger