User Manual

4
ASSEMBLY AND SET-UP
1 Remove the steering bolt and
locknut from the frame assembly
with a 13 mm wrench and a 5 mm
Allen wrench.
2 Insert the front fork into the
frame assembly.
q Attaching the Front Fork
Required Tools: 13 mm wrench and 5 mm Allen wrench
4 Reinsert the steering bolt and
secure with locknut using a 13 mm
wrench and a 5 mm Allen wrench.
3 Be sure to properly align the
slot on the headtube with the pin
on the front fork as shown.
1 Remove the four (4) coupling
bolts from the front fork using a
5 mm Allen wrench and a 10 mm
wrench.
2 Insert the wheel assembly into
the front fork and align holes.
When installing the wheel, make
sure the letter “F” and arrow
(located on the side of the wheel)
are facing the direction as shown
above.
q Attaching the Front Wheel
Required Tools: 5 mm Allen wrench and 10 mm wrench
WARNING: Failing
to properly tighten the steering
bolt that attaches the front fork
assembly to the frame assembly can
cause you to lose control and fall.
3 Reinsert the coupling bolts
through the front fork and tighten
securely.