User Manual

30 Amp
10
Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
1 Lift up the seat and loosen
the four (4) screws in the storage
compartment and remove the tray.
3 Remove the fuse and replace
with a new one of equal amperage.
Close the fuse box. Reattach seat/
storage compartment.
2 Locate fuse box on top of
battery. Open the fuse cover to
expose the fuse.
WARNING:
To prevent shock, please follow the
instructions accordingly and do not
skip or combine any steps.
Replacing the Fuse
Tools required: Phillips screwdriver
Turn power switch OFF.
Front Wheel Replacement
Tools required: Phillips screwdriver and 15 mm wrench
1 Remove the nuts on both sides
of the front axle using a 15 mm
wrench then remove the axle safety
washers (note hardware sequence).
2 Insert the wheel into the front
fork with the lock washers on the
outside of the fork.
3 Insert the tab on the lock
washer into the hole on the front
fork and tighten the nuts using two
(2) 15 mm wrenches.
REPAIR AND MAINTENANCE