Owners manual

5
Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
ASSEMBLY AND SET-UP
Using a bicycle tire pump equipped for
a Schrader valve, inflate both tires to
the PSI indicated on the sidewall of
the tire.
Inflating the Tires
Tires are inflated when shipped, but they invariably lose some pressure between the point of manufacturing and
your purchase. Inflate the tires to the correct PSI before first time use.
Note: Lower air pressure can result in a shorter ride time.
Periodically check both tires. Reinflate when needed.
WARNING:
Do not use the RSF350 for the first
time until you have inflated the tires
to the correct PSI. Failure to do so
may damage your motor bike and
void your warranty.
WARNING:
Do not over inflate, as this could
damage the tire or wheel.
Note: The pressurized air supplies
found at gasoline stations are
designed to inflate high-volume
automobile tires. If you decide to
use such an air supply to inflate
your tires, first make sure the
pressure gauge is working, then
use very short bursts to inflate to
the correct PSI. If you inadvertently
over-inflate the tire, release the
excess pressure immediately.