Owners manual

9
Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
Replacing the Fuse
Tools Required: Phillips Screwdriver
WARNING:
To prevent shock, please follow the
instructions accordingly and do not
skip or combine any steps.
1 Loosen the seven (7) Phillips screws from the battery cover and
remove cover.
3 Remove the fuse and replace
with a new one of equal amperage.
Close the cover and reattach the
battery cover.
2 Locate the fuse box attached to
the batteries. Open cover to expose
the fuse.
REPAIR AND MAINTENANCE
Front Wheel Replacement
Tools Required: 14 mm Wrench, 17 mm Wrench
1 Using 14 mm and 17 mm wrench
loosen the locknut; slide axle bolt
out and remove front wheel.
30 Amp
WARNING: To avoid a
pinch or injury, keep fingers away
from moving sprockets and chain.
WARNING: Failing to
properly adjust and tighten the
nuts and bolts that affix the front
wheel can cause you to lose control
and fall.
Note: The arrangement of the
hardware sequence:
9-4 Locknut
9-3 Washer
Front Fork
9-2 Spacer
Wheel
9-2 Spacer
Front Fork
9-3 Washer
9-1 Axle Bolt
9-4
9-3
9-1
9-2
9-2