User Manual

5
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
PRE-RIDE CHECKLIST
USAGE
How to Ride
• Put kickstand up.
• Turn power switch “ON”.
• Place both hands on handlebars and kick start the unit using one foot to push scooter forward while applying the
throttle.
• (E100 Glow only) LED lights are activated when the throttle is applied.
How to Stop
Release the throttle and apply the brake lever until the unit comes to a complete stop.
Note: Electric scooter must be
moving at least 3 mph (5 km/h)
while engaging throttle to
engage motor.
Note: As an additional safety
feature, the scooter is designed to
cut power to the motor when the
hand brake is applied.
Note: Motor will re-engage,
(without having to kick start), if
brake is released and throttle is
applied before scooter has slowed
down to under 3 mph (5 km/h).
Brake
Check the brakes for proper function. When you squeeze the
lever, the brake should provide positive braking action. Make
sure that the brake is not rubbing when the lever is released.
Tires
Periodically inspect the tires for excess wear and replace as
needed. Regularly check the tire pressure and inflate as needed.
Frame, Fork and Handlebars
Check for cracks or broken connections. Although broken frames
are rare, it is possible for an aggressive rider to run into a curb
or object and wreck, bend or break a frame. Get in the habit of
inspecting your scooter on a regular basis.
Hardware/Loose Parts
Before every ride, check all parts, such as nuts, bolts, cables,
fasteners, etc., to ensure they are secure and assembled correctly.
There should not be any unusual rattles or sounds from loose
parts or broken components. If the unit is damaged, do not ride.
Reference “Safety Warnings” on page 1 of this manual.
Safety Gear
Always wear proper protective gear, such as an approved safety
helmet. Elbow pads and kneepads are recommended. Always wear
athletic shoes (lace-up shoes with rubber soles) and keep shoelaces
tied and out of the way of the wheels, motor and drive system.
NEVER RIDE BAREFOOTED OR IN SANDALS.
Laws and Regulations
Always check and obey any local laws or regulations.
Insurance
Do not assume that your existing insurance policies necessarily
provide coverage for scooter use. Check with your insurance
company for information regarding insurance.