Instructions / Assembly

4
Need Help? Visit our website for replacement parts, product support and a list of authorized service centers
at www.razor.com or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time. Please have the
product I.D. code located on the white label on your product or back of charger available for better assistance.
PRE-RIDE CHECKLIST
Hardware
Check all parts such as nuts, bolts, cables, fasteners, etc.
to ensure they are secure and assembled correctly. If the
unit is damaged do not ride. Reference “Safety Warnings”
on page 1 of this manual.
Laws and Regulations
Always check and obey any local laws or regulations.
Insurance
Do not assume that your existing insurance policies necessarily
provide coverage for scooter use. Check with your insurance
company for information regarding insurance.
Brake
Check the brakes for proper function. When you squeeze the lever,
the brake should provide positive braking action. Make sure that
brakes are not rubbing.
Frame, Fork and Handlebars
Check for cracks or broken connections. Although broken frames
are rare, it is possible for an aggressive rider to run into a curb
or wall and wreck, bend or break a frame. Get into the habit of
inspecting your scooter on a regular basis.
Tires
Periodically inspect the tires for excess wear and regularly check
the front tire pressure. Re-inflate as necessary.
q
q
q
q
USAGE
q Starting the Scooter
To start unit, turn on power switch; place both hands on handlebars and kick start the unit using one foot to
push scooter forward while applying the throttle with right hand. The scooter must accelerate to 3mph/5kph
for motor to engage.
E100
E100
q Stopping the Scooter
To stop unit, release the throttle and apply the brake until the unit comes to a complete stop.
Note: Electric scooter must
be moving at 3 mph/5 kph
while engaging throttle to
engage motor.
q
q
Note: As an additional safety
feature, the scooter is designed
to cut power to the motor when
the hand brake is applied.