Quick start Guide

RAYZR7.COM
1
SETTING UP
Power
> AC: For AC power connect the power cable
to the <AC Connector> (powerCON TRUE1) and set the on / off switch to
1 to power the fixture on.
> Battery / DC: To power the fixture by battery connect
the battery power cable to the <DC Connector> (speakON)
and set the on / off switch to 2 to power the fixture on.
Power Switch: AC / OFF / DC
AC Connector
DC Connector
180 - 264 V, 50 - 60 Hz
90 - 132 V, 50 - 60 Hz
90 - 264 V, 50 - 60 Hz
90 - 264 V, 50 - 60 Hz
90 - 264 V, 50 - 60 Hz
300 Daylight (EU)
300 Daylight (US)
300B Bi-color
200 Daylight
200BM Bi-color
300 Daylight
300B Bi-color
24 -36 V
24 -36 V
200 Daylight 24 -36 V
200BM Bi-color 12 -24 V
> When mounting the fixture
in a hanging position, secure
the light by adding an
additional safety cable that
connects the Yoke with
a reliable and strong
structure.
Securing
16mm/28mm Combo Pin
Holes for Safety Cable
Mounting
> The fixture must be
fastened at the Yoke by
attaching it to a spigot of
a matching stand or
other holding device
and tightening the
spigot mount screw.