Specifications

Chapter 6: Post Installation Procedures

4. Press the +1 or -1 key to change the setting from OFF to YES. The

TURN BOAT page is then displayed.

D3451-1

5. Keeping the boat speed below 2 knots, turn the vessel in slow

circles. It should take at least 3 minutes to complete 360°.

6. Keep turning your boat until the unit beeps and the Deviation

screen is displayed.

This shows the maximum deviation detected, and indicates that

compass correction has been completed successfully.

Note: If the deviation value exceeds 15° or a deviation value is not

displayed at all, you should consider moving the fluxgate compass to a

better location.

133_3c06.p65 14/06/99, 10:2459