Specifications

56 ST6000 Plus Autopilot Control Unit Owner’s Handbook
D3393-1
3. If the helm produces a turn to port, reverse the motor connections
at the course computer.
4. If the helm overshoots and has to drive back or starts to hunt back
and forth, you need to increase the Rudder Damping option in
Dealer setup (see Chapter 4).
Wind transducer interface
If the ST6000 Plus is connected to a wind instrument via its NMEA
data port or SeaTalk, then the link between the two instruments should
be checked as follows:
• Press standby and auto together.
The ST6000 Plus should display the Vane mode screen, with the
locked wind angle and locked heading as shown.
Alternatively, if the wind data is not received , the ST6000 Plus will
display a NO DATA error message.
133_3c06.p65 14/06/99, 10:2456