Specifications

Chapter 5: Installation
51
Cabling
The NMEA port should be connected to a Navigator or Wind
instrument.
Red
(Data In +ve)
Blue
(Data In -ve)
D3442-1
Navigator
with NMEA output
NMEA cable connectors
• NMEA connections are made using spade connectors.
• When fitting the spade connectors, make sure the connector fits
securely over the blade and not between the connector and its plastic
insulating boot – incorrect fitting will give intermittent contact
which will lead to faulty autopilot operation.
133_3c05.p65 14/06/99, 10:2451