Specifications

Chapter 5: Installation
49
D4585-1
534 61
7. Mount the assembled control head, studs, and gasket into the
panel.
8. Locate the bracket (6) onto the fixing studs and secure the
assembly to the panel with the thumb-nuts (5). Tighten the thumb
nuts BY HAND. Do NOT use a wrench.
Connections to the SeaTalk bus
SeaTalk cables
The ST6000 Plus is supplied with a 9 m SeaTalk cable as standard.
The following table lists other cables available from your dealer:
Part No: Type Length
D187 Flat to a male round connector 0.15 m (6 in) long
D188 Flat to a female round connector 0.3 m (12 in) long
D284 Flat moulded plugs at both ends 1 m (3 ft 3 in) long
D285 Flat moulded plugs at both ends 3 m (9 ft 9 in) long
D286 Flat moulded plugs at both ends 6 m (19 ft 6 in) long
D287 Flat moulded plugs at both ends 9 m (29 ft 3 in) long
133_3c05.p65 14/06/99, 10:2449