Specifications

38 ST6000 Plus Autopilot Control Unit Owner’s Handbook
The value must be within the range 15 to 40°, and can be adjusted in 1°
steps.
Range: 15 to 40°
Default: 20°
AutoTrim
The AutoTrim level setting determines the rate at which the autopilot
applies “standing helm” to correct for trim changes caused by varying
wind loads on the sails or superstructure. The settings are:
Setting Effect Recommended for:
Off No trim correction
1 Slow trim correction Heavy displacement vessels,
with full keel or transom
rudder.
2 Medium trim correction Heavy displacement vessels.
3 Fast trim correction Moderate to light
displacement vessels.
4 Super fast correction Planing power vessels
Defaults: Displacement 2
Semi displacement 3
Planing 3
Sterndrive 3
133_3c04.p65 14/06/99, 10:2338