Specifications

Chapter 4: Customising the System
35
The features that can be adjusted are listed in the table at the end of this
chapter, where you can record your settings for future reference.
Information on the functions of the different settings is given in the
remainder of this section.
The following points should be noted:
• Make sure that the autopilot is in Standby mode before you access
Dealer Setup
• Setup options are always saved on exit
Pilot type
This should be set when the system is first switched on. The default
settings for other Dealer Setup options depend on the pilot type you
select here.
Setting Description
DISPL MNT Displacement
SEMI DIS Semi-displacement
PLANING Planing
STERN DRV Sterndrive
Default: Displacement
Calibration lock
Calibration lock controls whether User Setup and Intermediate Setup
are available, and is intended for charter boat users.
Setting Description
ON Setup ON
OFF Setup OFF
Default: OFF
Rudder gain
This must be set while under way, as described in Chapter 6, Post
Installation Procedures.
133_3c04.p65 14/06/99, 10:2335