Installation manual

6 SeaTalk Autopilot Hand-held Remote
ST4000+ and ST5000+ autopilots
ST4000+ and ST5000+ control units have two parallel SeaTalk ports.
You can connect the hand-held remote to either of these ports.
Note: If any other SeaTalk instruments are connected to the ST4000
or ST5000 control units, the red wire (+12 V) must be connected to a
separate 12 V supply fitted with a 5 A fuse. It should NOT be
connected to the control unit.
ST4000 and ST5000 autopilots
The main difference with older ST4000 and ST5000 control units is
that the SeaTalk connections at the control unit will require spades
(part number: D211).
Hand-held remote
12 V
D5684-1
ST4000+ or ST5000+
Red
(+12 V)
with
5 A fuse
Yellow
(SeaTalk
data)
Screen
(SeaTalk
ground)
Terminal
stripes
Hand-held remote
D177
(Not supplied)
12 V
D5685-1
ST4000 or ST5000
5 A
fuse
RYS
Red
(+12 V)
Yellow
(SeaTalk
data)
Screen
(SeaTalk
ground)
Terminal
stripes
81197_1.book Page 6 Wednesday, August 1, 2001 11:19 AM