Specifications
46 ST6000 Plus Autopilot Control Unit Owner,s Handbook
Range: 0ff = Off
nth = North
Sth = South
Default: Off
Latitude
This screen is only used if AutoAdapt is set to North or South.
Use the +1, -1, +10, and -10 keys to set the value to your vessels
current latitude, to the nearest degree.
Range: 0 to 80°
Default: Off
Note: If valid latitude data is available via SeaTalk or NMEA, it will be
used instead of this calibration value.
Wind Trim
This varies the response of the autopilot when in wind mode.
The settings available are as follows:
Range: 1 Normal setting
2 Faster response for wind shifts
Default: 1
Tack angle
This adjusts the heading change controlled by the Auto Tack feature
(+1 and +10 or 1 and 10)
The settings available are as follows:
Range: 40 to 125 degrees
Default: 100 degrees