Specifications

Chapter 5: Customising the System
39
SECONDS
+1-1
OR
Recommended settings
The following pages list the default calibration settings for sailing/
power displacement and planing power vessels. Once you have set the
Pilot Type, these will provide good performance for initial sea trials
and can be fine tuned later to optimise performance.
After initial calibration has been carried out, further adjustment can be
made at any time.
The features that can be adjusted are listed in the table at the end of this
chapter, where you can record your settings for future reference.
Information on the functions of the different settings is given in the
remainder of this section.
The following points should be noted:
 Make sure that the autopilot is in Standby mode before you access
Dealer Setup
 Setup options are always saved on exit
Pilot type
This should be set when the system is first switched on. The default
settings for other Dealer Setup options depend on the pilot type you
select here.