Specifications

24 ST6000 Plus Autopilot Control Unit Owner,s Handbook
The response can be changed at any time. To do so:
1. Press the +1 and -1 keys together momentarily to display the
RESPONSE screen.
2. Press +1 or -1 to change the response level.
3. Wait for 10 seconds, or press disp , to return to the previous
display.
D3606-1
Changing the rudder gain
Press the +1 and -1 keys together for 1 second to display the Rudder
Gain screen, and adjust the setting in the same way as for the response
level. Refer to Chapter 7, Post installation procedures, for instructions
on how to check that the rudder gain is set correctly.
WARNING:
It is important that the rudder gain is correctly set on planing
craft. Incorrect adjustment will lead to poor steering performance
and is dangerous at high speeds.
3.4 Alarms
This section summarises the alarms (in order of priority) that are
reported by the ST6000 Plus.
Press standby to clear an alarm and return to hand steering, unless
indicated otherwise.