Specifications

2–7
Operation
F232096
The table below provides a detailed description
of the 4 cycles as programmed at the factory.
EDC Cycle Chart
Stage
Step
Cycle Time
Status
Indicator
Water
Level
Water Temperature
Supply
Normal
Perm
Press
Delicate
Special
Wash
Cold
Warm
Hot
Prewash
Fill/Tumble 0:00* 0:00* 0:00* 3:00
P
High Cold Warm Warm 1Drain/Tumble 1:00 1:00 1:00 1:00
Spin 0:00 0:00 0:00 0:00 P, S
Flush
Fill/Tumble 0:00* 0:00* 0:00* 0:00*
P
Low Cold Warm Warm 1Drain/Tumble 1:00 1:00 1:00 1:00
Spin 0:00 0:00 0:00 0:00 P, S
Wash
Fill/Tumble 7:00 6:00 5:00 8:00
W
Low Cold Warm Hot 1, 2Drain/Tumble 1:00 1:00 1:00 1:00
Spin 0:30 0:00 0:00 0:30 W, S
Rinse
Fill/Tumble 3:00 3:00 3:00 4:00
R
High Cold Warm Warm 1, 2Drain/Tumble 1:00 1:00 1:00 1:00
Spin 0:00 0:00 0:00 0:00 R, S
Extra
Rinse
Fill/Tumble 0:00* 0:00* 0:00* 0:00*
R
High Cold Warm Warm 1, 2Drain/Tumble 1:00 1:00 1:00 1:00
Spin 0:00 0:00 0:00 0:00 R, S
Final
Rinse
Fill/Tumble 4:00 4:00 3:00 4:00
R
High Cold Warm Warm 2, 3Drain/Tumble 1:00 1:00 1:00 1:00
Spin 0:30 0:30 0:30 0:30 R, S
Spin
Spin 5:00 5:00 5:00 5:00
S
Shake Out 1:00 1:00 1:00 1:00
*When the time for a Fill/Tumble step is set to zero, that entire step is skipped.
Status indicator key: P=Prewash, W=Wash, R=Rinse, S=Spin