Installation Manual Part 7

FCC 10: CDG-ARTU EXHffilT C
MAGNASTAR C-2000 DIGITAL AIRBORNE TELEPHONE SYSTEM
9.3 MMTI Commanded Mode
The MMTl commanded mode allows the user more flexibility when testing the C-2000 system verses the
installation mode. However, more step are required to perform an equivalent task in the commanded mode.
The commanded mode also allows additional test capabilities over the installation mode.
The MMTI commanded mode menu structure is comprised of four sections: the Radio Configuration
menu, the Radio Installation/Test menu, the Boot menu and the Radio Maintenance menu. A flow chart of
the menu structure is shown in Figure 9.3.1
~ RADIO CONFIGURATION MENU
LOAD SPEED-DIAL DATABASE
SAVE SPEED-DIAL DATABASE
VIEW INVENTORY DATABASE
REPORT FAULT COUNTERS
ENABLE/DISABLE STATUS UPDATES
t: ARTU STATUS UPDATES
PILOT STATUS UPDATES
ENABLE/DISABLE RT RCL BER
-I RADIO INSTALLATION I TEST MENU
SET RADIO LOCKED I OFFLINE
COMMANDED BIT MENU
RF TEST MENU
TRANSMIT CONTINUOUS WAVE
TRANSMIT RANDOM QAM
STOP TRANSMIT
ENABLE TSC RECEIVER
ENABLE PILOT RECEIVER
PERFORM INITIAL PA EQUALIZATION
PERFORM PA EQUALIZATION UPDATE
FAN CONTROL (ON I AUTO)
HANDSET TEST MENU
~ HANDSET GENERATED CALL PROGRESS TONES
RADIO GENERATED CALL PROGRESS TONES
EST ABUSH HANDSET LAN
RESET HANDSET ATTRIBUTES
RESET MAINTENANCE ACCESS PIN
SET RADIO UNLOCKED I ON LINE
1--1 BOOT MENU
START RADIO SOFTWARE
REPORT RADIO SOF1WARE FILENAMES
INITIATE BOOT
LOAD RADIO SOF1WARE
BATCH LOAD RADIO SOFTWARE
START MMT TUTORIAL
CONFIGURE MMT COM PORT
CONFIGURE BATCH DOWNLOAD BAUD RATE
'--I RADIO MAINTENANCE OPERATIONS MENU
DEBUG MENU
A Flow Chart Showing The Menu Structure Of The MMT Commanded Mode.
Figure 9.3.
RevB9-20