Installation Manual Part 7

FCC ID: CDG-ARTU EXHIBIT C
MAGNASTAR C-2000 DIGITAL AIRBORNE TELEPHONE SYSTEM
9.3.3 MMTI Commanded Mode - C-2000 MMT Radio Installationffest Menu
The Installationffest menu is used to command the radio to perfonn may of the task necessary to check out
a C-2000 installation. The MMT Radio Installationffest menu screen is shown in Figure 9.3.3.1. The
Radio Installationffest menu has three sub-menus in addition to the radio operational state change
commands. The sub-menus are the Commanded BIT. RF Test and the Handset Test menus. A brief
description of each of the Radio/lnstallation menu selections is provided as follows:
~ y. .0& -.7 aadio "8P0D888 +
f I
.
1 :
. I
.. .
. .
~ .
~ +
'+ 87 - ~~ +
: C-2000 -.7 UDIO I8~n~/"'" - :
I .
I .
: ~ - ..~ aa4io Loc-.4/OffliAe :
: 2 - ~o C_--"-" .z~ - :
:J-~oUft.~- :
: . - ~o ~~ ft.~ ..- :
: 5 - ..~ aa4io VDl~/ODli- :
: :
: 8Dte~ -.dio ft.~ ..18C~iOD (~ - 5. .aa ~o exi~ >. - :
. .
. .
. .
. .
. .
. .
+ ~ ~~.* +
The MMT Radio InstallationITest Menu Screen.
Figure 9.3.3.
1) Set Radio Locked/Offline - The locked/offline command will change the operational state of the ARTU.
The locked/offline state will allow the ARTU to perform individual tests associated with normal
operational functions. When the C-2000 is placed in the locked /offline mode, the Handset will no
longer respond to keypad inputs and the screen may go blank.
2) Goto Commanded BIT Menu - The Commanded BIT menu is to be used for commanding the ARTU to
perform BIT tests and to view BIT test results. See paragraph 9.3.3.1 for a brief description of the
Commanded BIT menu selections.
3) Goto RF Test Menu - The RF test menu is to be used to perform tests related to the Radio Frequency
(RF) portion of the ARTU. See paragraph 9.3.3.2 for a brief description of the RF Test menu
selections.
4) Goto Handset Test Menu - The Handset test menu is to be used to perform tests related to Handset
operation or high speed data bus portion of the ARTU. See paragraph 9.3.3.3 for a brief
description of the Handset Test menu selections.
5) Set Radio Unlocked/Online - The Unlocked/Online command will change the operational state of the
ARTU. The C-2000 will operate normally when the ARTU is in the Unlocked/Online State.
RevB
9-26